-
Since its predecessors appeared in 1984 the Dynavector DV-507 MKI set a bench mark on how a tonearm should be produced. Now over 25 years later, Dynavector still proudly produces the DV-507 that is now in its third edition.
With bi-axis inertia controlled tonearm, DV-507 has the ability to trace music signal grooves with extreme accuracy, regardless on the cartridge that is used. Even on a record that is a challenge for most other tonearms (when a record is warped or defective in groove accuracy), the Dynavector Dv-507 MKIII still shines through, delivering highly accurate reproductions of your beloved vinyl collection.
-
Bi-Axis inertia controlled Dynamic and Eddy Current Damping Dynamic Balance type tone arm
Overall length 306mm. With head shell: max 326 mm
Effective length :241mm (i.e. tonearm pivot point to cartridge stylus point)
Overhang :15mm
Offset angle :21.5 degree
Height :59mm lifts up to 92mm
Height adjustment range :39mm-72mm at sub arm center
Depth :36mm without connecting cable
Optimum cartridge weight :15-35 grams, including headshell
Horizontal tracking angle error :-1.1 degree - +2.2 degree , 0 degree at inner band of record, 2.2 degree at outside
Tracking force adjustment range :0-38 grams by 0.2 grams step
Sensitivity :Horizontal:less than 50 mgrams, Vertical:less than 40 mgrams
Net weight :1,380 grams
Output connection :5P connector
Headshell connection :EIA standards 4 Pin connector
Accessary low resistance (0.046 ohms/m, 54pF/m) high quality arm cable,
milled aluminium headshell weight 15.4 grams.
mounting template for the arm
overhang guage for the headshell
-
-