-
Featuring many innovative features which enhance sound quality, the Epos Epic 2 speakers are solidly constructed from internally braced 18mm thick MDF, and finished in a high quality vinyl wood veneer of either cherry or black ash. A removable audiophile baffle gives best sound quaility, however this can be removed if desired and replaced with a fabric grille for better protection of the drive units.
A 25mm soft dome tweeter is detailed and fast in response, whilst the 179mm polypropylene bass midrange driver is reflex loaded leading to deeper, more extended bass and clear, transparent midrange.
Simple second order crossover filters are constructed from metal oxide resistors and polypropylene capacitors for the most transparent sound quality possible.The speakers can be driven from amplifiers in the power output range of 20W to 120W.
Gold plated bi-wired terminals on the rear allow the speakers to connect using either two or four core speaker cable.
Sounding best on open stands of approximately 500mm height, these speakers will reward the listener with glorious, rich sound which is super detailed but also smooth and easy on the ear.
-
|
|
| Specification |
Power Handling 120 Watts unclipped speech and music Frequency Range 48 Hz – 25 kHz Impedance 4 Ohm nominal Sensitivity 90dB / 2.83V@1m Amplifier Compatibility 20 – 120 Watts Positioning Not less than 10 cm (4”) from rear wall Tweeter Epos 25mm soft dome with high-temperature voice coil, ferrofluid cooling and neodymium magnet system. Magnetically shielded Bass/Midrange Driver Epos 179mm, with 25mm high-temperature voice coil and polypropylene cone. Magnetically shielded Crossover Bass and tweeter cross over with 2nd order filters. Tweeter network uses Metal Oxide resistor, polypropylene film capacitor and air-core inductor. Woofer network features a large-core laminated-iron inductor and polypropylene film by-pass capacitor. Terminal Panel Gold-plated and Bi-wirable. Can be single or double wired by removing shorting links provided. Internal wiring 18 AWG stranded cable. Cabinet 18mm MDF wrap and front baffle, extensively braced internally Finish Cherry or Black Ash vinyl veneer Grilles Removable ‘audiophile’ grille fitted as standard, Grille–removal tool included. Alternative cloth-covered grilles are packed as accessories Size HxWxD – mm / in. 415 x 210 x 280 / 16.4 x 8.3 x 11 Weight 8.6 kg / 19 lb per single speaker 20.7 kg / 46 lb per carton Packaged One pair per carton |
-
-