Lyngdorf CD-1 CD player

The CD-1 is a pure CD transport/player designed with the best design techniques and components possible. Used with any of the Lyngdorf amplifiers, the CD-1 provides the sort of unsurpassed performance that only comes from complementing components. The CD-1 is designed with the all the experience gained from designing the Lyngdorf digital amplifier products. Low-noise design techniques are applied to carefully upsample the digital output. The digital output is available in SPDIF, Toslink or AES format. The D/A converter section is the same as in the legendary Millennium amplifier and it is being used to drive a high quality, single ended and balanced output stage. The intuitive push-to-enter user interface is used for daily operation such as play, pause, skip etc but also for more sophisticated use such as setting all parameters of the CD-1, e.g. sample rate or the level of the audio signal output. All operations can be of course accessed with the included remote control which also operates the Lyngdorf amplifiers. And if you have a Lyngdorf true digital amplifier you can shut down all analog sections to turn the CD-1 into a transport only to obtain the best possible performance from the CD-1. Some reproduce what is on the disc - the Lyngdorf CD-1 re-plays the music on the disc, no more, no less . . . PARAMETER VALUE 0db analog output level 3.8 Vrms Selectable sample rates on digital outputs 16 bits 44.1kHz Selectable sample rates on digital outputs 24 bits 48 / 96 / 192 kHz Frequency response L/R +/-0.02dB 20 - 20K Hz Balanced analog output impedance 50 Ohms THD+N, A-wgt 0.00018% Crosstalk - 125 - 16K Hz -114 dB S/N ratio: THD + N, A wgt ('infinite zero' track) 115 dB Dynamic Range: THD + N, A wgt (out-put -60 dBFS 1k Hz) 100 dB Digital Outputs AES, SPDIF, Toslink