-
Project have put a lot of R&D into the Project 6 PerspeX turntable to maximise performance and sound quality.
Project 6 PerspeX turntable subchassis is made from high density Corean which has high density coupled with very low resonance.
Unusually, the sprung subchassis does not use mechanical springs, but magnetic repulsion between opposing magnets, so that there is no physical connection between the two parts - this creates superb isolation from mechanical disturbance.
Equipped with the superb Project 9cc carbon fibre tonearm capable of accepting moving magnet and moving coil cartridges alike, this turntable exhibits amazing dynamics, detail and bass extension.
-
| |
|
| Specifications |
| Nominal speeds |
33 / 45 r.p.m. |
| Dust cover |
yes |
| Magnet supported sub-chassis |
yes |
| Record clamp |
yes |
| RCA phono sockets |
yes |
| Sorbothane-damped aluminium cones |
yes |
| Tonearm |
Pro-Ject 9cc Evolution |
| Carbon-fibre headshell and armtube |
yes |
| Effective tonearm length |
9 " (230mm) |
| Effective tonearm mass |
8g |
| Overhang |
18mm |
| Supplied counterweights |
cartridge weights 5 - 7,5g, 7 - 10g, 9 - 11g and 10 - 14g |
| Downforce range |
10 - 35mN |
| Speed variance |
±0,5 % |
| Wow and flutter |
±0,06 % |
| Signal to noise |
-73dB |
| Platter weight/diameter |
2kg/300mm |
| Power supply type |
Mains-fed outboard power supply |
| |
220 - 240V, 50 cycles or 100 - 110V, 60 cycles |
| Output voltage |
16V/500mA AC |
| Power consumption |
2W |
| Dimensions (lid open) |
460 x 420 x 465mm |
| Dimensions (lid closed) |
460 x 160 x 365mm |
| Weight |
10,5kg |
|
-
-