Sennheiser RS220 digital wireless Headphones
The RS220 design is based on the famous HD600 platform (a wired, professional quality headphone) where the sound quality is exquisite audiophile grade quality. The audio signal is transmitted from the RS220 charging dock via DSSS (direct-sequence spread spectrum) which operates on the 2.4GHz frequency giving uncompressed, full bandwidth audio, and low latency (lip sync) when watching movies and other high definition video sources.
To charge the headphones simply place them on the charging dock, a full battery charge gives eight of wireless audio listening. The transmitter/ charger dock has a wide range of input and output connection options on it's rear panel. There is an analogue stereo input on RCA phono sockets, a coaxial digital input also on a single RCA phono socket, and lastly a single optical toslink input. Each input is mirrored by the equivalent output, to allow an onward audio feed to other products, such as a TV sound bar for example. You can select your desired input source either from the front panel button of the transmitter dock, or from the selectable switch on the headphones themselves.
The headphones themselves have some handy controls located around the ear cups to help with your listening enjoyment - power on/ off, left to right sound balance and volume up and down, and of course the input selector switch.
The available transmitter to headphone range is 90 metres line of sight, or through walls and ceilings you should experience 9 to 30 metres depending upon the construction materials in use.
In use the RS220's are fantastic - you are untethered from your audio sources, however sound quality remains uncompromised. A very comprehensive accessory kit is included in the package, to allow you to connect to a variety of input sources and power sources around the world.
Power supply PSM11R-090 (9 V DC, 1 A) Plug-in mains unit
Power consumption typ. 0.30 W Standby mode
Signal-to-noise ratio typ. 90 B
Frequency range 2,400 - 2,483.5 MHz
Weight (Transmitter) 484 g
Frequency response 16 Hz to 22 kHz
Impedance 150 ohms
THD, total harmonic distortion typ. < 0.1% (1 kHz, 100 dB SPL)
Power supply 2 NiMH rechargeable batteries (BA 200, type HR03)
Operating time 6 to 8 hours
Weight (Receiver) 329 g incl. rechargeable batteries
Providing your item is in stock, the order is usually dispatched within 24 hours. Please remember that postage and packing is completely free for orders over £50*. Out of stock items will be dispatched as soon as they become available, out of stock items can take between 4 to 21 days for dispatch. For information on delivery costs, please refer to the table below or click this link for more information.
|Shipping Costs||Mainland UK (Next-Day)||Offshore/Out-of-reach (2-day)Nothern Ireland, Channel Islands, Isle of Man, Scottish Islands, Scilly Islands||Republic of Ireland (2-day)|
|Under £50 Orders
|Over £50 Orders
|Saturday by 12
*We ship free of charge to mainland UK addresses, excluding the Scottish Highlands or 'Out-Of-Reach' Scottish locations. Please consult the list of post-codes located here to see if your location falls within this category. If you are still unsure, please contact us on 01432 354921. We also ship to Northern Ireland, Channel Islands, Scilly Isls, Scottish Isles and Scottish Highlands, however delivery to these locations will incur a charge and can only be sent via a 2-day service.