Tannoy CMS401e in ceiling speaker (single)

£149.00

Click on the image to enlarge and zoom.

This product is no longer available

The Tannoy CMS401e Ceiling Monitor System is suited to high-level music and speech reinforcement applications requiring exceptional sonic quality with uncompromised reliability. Specifically designed for fast, simple and cost effective installation in new and existing buildings, the 100mm (4.00") speaker can be entirely angled towards the listener within the fixed ceiling mounting ring. The challenge of difficult speaker placement, in less than perfect room configurations, is therefore eliminated by being able to discreetly pivot the loudspeaker towards the desired area of coverage. The driver and passive frequency dividing network are mounted in an injection-moulded pod. This, like the ceiling mounting ring in which the pod can be swivelled, is manufactured from UV/weather resistant UL94V-0 ABS material. When mounting the speaker the three self aligning clamps locate the speaker while at the same time locking the pod angle securely. The inclusion of a premium quality Tannoy THP 30 multi-tap transformer, for distributed line operation, provides high system sensitivity, wide bandwidth and dynamic range; achieved with very low insertion loss. Transformer taps are adjusted via the rotary switch mounted on the rear of the speaker pod: 70V systems: 30W / 15W / 7.5W / 3.75W / OFF & Low Impedance operation 100V systems: 30W / 15W / 7.5W / OFF & Low Impedance operation Packaged with tile rails and C-ring for quick & easy installation and simple stocking logistics. A plaster (mud) ring is available as an optional accessory.

SYSTEM
Frequency Response (-3dB) (1)     110Hz - 22kHz
Frequency Range (-10dB) (1)     80Hz - 24kHz
System Sensitivity (1W @1m) (2)     88dB (1W = 2.45V for 6 Ohms)
Nominal Coverage Angle     90 degrees conical
Coverage Angle (1kHz to 6kHz)     120 degrees
Directivity Factor (Q)     5.26 averaged 1kHz to 6kHz
Directivity Index (DI)     6.3 averaged 1kHz to 6kHz
Rated Maximum SPL     Average: 105dB
Peak: 111dB
Power Handling (3)     Average: 50W
Programme: 100W
Peak: 200W
Recommended Amplifier Power     100W @ 6 Ohms
Nominal Impedance     6 Ohms
Transformer Taps (via front rotary switch)     70V: 30W / 15W / 7.5W / 3.75W / OFF
& Low Impedance operation
100V: 30W / 15W / 7.5W / OFF
& Low Impedance operation
Crossover     7kHz inductively coupled
TRANSDUCERS
Low Frequency     100mm (4.00") mineral loaded polypropylene
High Frequency     19mm (0.75") CT aluminium dome.
PHYSICAL
Enclosure     Back Can: Reflex loaded UL 94V-0 rated ABS
Baffle: Reflex loaded UL 94V-0 rated ABS Grille: Steel, with weather resistant coating
Safety Features     Safety ring located at rear of enclosure
for load bearing safety bond
Back Can     Complete with fixed backcan
Connectors     Removable locking connector with screw
terminals with "loop through" facility
Hole Cutout Diameter     187mm (7.36")
Dimensions     Bezel diameter: 205mm (8.07")
Front of ceiling to rear of pod: 147.6mm (5.81")
Net Weight (ea)     3.05kg (6.72lb)
Included Accessories     C Ring, tile bridge, paint mask,
cutout template, grille
Optional Accessories     Plaster (Mud) Ring
Clamping Design     Min / Max clamping range: 0.0mm (0.0") / 20.0mm (0.79")
Recommended clamp torque: 1.5Nm

There are no reviews for this product yet. Be the first to write a review.

Providing your item is in stock, the order is usually dispatched within 24 hours. Please remember that postage and packing is completely free for orders over £50*. Out of stock items will be dispatched as soon as they become available, out of stock items can take between 4 to 21 days for dispatch.

Deliveries usually take 1-3 working days. The majority of orders are sent via our couriers'; Interlink Express on a next-day-delivery service. Smaller, low value or light-weight items are normally posted using Royal Mail Recorded or Royal Mail Special Delivery.

Once your product has been dispatched, you will be notified via email and sent a unique consignment number, you can use this number at http://www.interlinkexpress.com to check the status of your delivery. If you have provided a mobile telephone number, Interlink's Predict service will notify you by text (and email) of a one-hour delivery window. If the window they suggest is inconvenient, you can change the date of delivery to a later one via text or email.

*We ship free of charge to mainland UK addresses, excluding the Scottish Highlands or 'Out-Of-Reach' Scottish locations. Please consult the post-codes below to see if your location falls within this category. If you are still unsure, please contact us on 01432 354921. We also ship to Northern Ireland, Channel Islands, Scilly Isles, Scottish Isles and Scottish Highlands, however delivery to these locations will incur a charge and can only be sent via a 2-day service.

Shipping CostsMainland UK (Next-Day)Offshore/Out-of-reach (2-day)Northern Ireland, Channel Islands, Isle of Man, Scottish Islands, Scilly IslandsRepublic of Ireland (2-day)
Under £50 Orders £7.50 £12.50 £15.00
Over £50 Orders FREE £19.99 £29.99
Surcharge Orders £50.00 £69.99 £79.99
Saturday Delivery £12.99 N/A N/A
Sunday Delivery £12.99 N/A N/A
Saturday by 12 Delivery £35 N/A N/A

 

Post codes exempt from the free delivery service include:

Scottish Highlands Post Codes: AB30-38, AB41-42, AB44-56, FK17-99, G83, IV1-28, IV30-39, IV52-54, IV63, KW1-14, PA21-33, PA34-40, PH15-26, PH31-41, PH49-50
Islands Post Codes: HS1-9, IV40-51, IV55-56, KA27-28, KW15-17, PA20, PA41-49, PA60-78, PH42-44, ZE1-3
Northern Ireland: All BT postcodes
Channel Islands Post Codes: JE, GY
Scilly Isles Post Codes: TR21, TR22, TR23, TR24, TR25