Enquire Contact form
Audio Technica AT33MONO Moving Coil Cartridge
The AT33MONO is a mono cartridge specifically made for stereo playback systems, this cartridge, in particular, comes with an elliptical stylus chip and a hard duralumin cantilever. The coil on this cartridge is horizontal, so what this means is that electricity is only generated horizontally. The PCOCC coil prevents crystal gain boundary formation. This mono cartridge has a strong body stabilised by a rigid body set-up. The AT33MONO has a very special rubber known as "Hanenite" which helps eliminates unnecessary vibrations.
Who is Audio Technica?
Audio Technica is a quality audio component manufacturer, has designed and developed some of the most critically acclaimed headphones, turntables and cartridges on the market since their establishment in 1962. AT build products under a common design philosophy, to provide the most durable and high performing equipment at the best possible price.
Type MC-type Mounting 1/2" Centers Frequency Response 20 - 20,000Hz Body Material Aluminium/Synthetic Resin Channel Separation 30dB (1kHz) Output Channel Balance 1.0dB (1kHz) Output Voltage 0.35mV (1kHz and 5cm/sec. horizontal signal) Vertical Tracking Angle 23° Vertical Tracking Force Range 2.3 - 2.7g (2.5g standard) Stylus Shape Conical Stylus Size 0.65 mil Cantilever Duralumin pipe Coil Impedance 10Ω (1kHz) Coil Inductance 28µH (1kHz) DC Resistance 10Ω Static Compliance 20×10-6cm/dyne Dynamic Compliance 6×10-6cm/dyne (100Hz) Recommended Load Impedance More than 100Ω (when head amp connected) Weight 6.9g Dimensions H16×W16.6×D26.5mm Replacement Stylus When the stylus is to be replaced, replace the entire cartridge. Take the used cartridge to your Audio-Technica Authorised Service Centre. The new cartridge, or any other model which is desired among the line-up of MC cartridges sold by Audio-Technica, are available at the stylus replacement price. Accessories Included Non-magnetic screwdriver x1, Washers x2, Protector x1, Cartridge fastening screw 13mm×2, 19mm×2, Nut x2, Brush x1, PCOCC lead set x1
Providing your item is in stock, the order is usually dispatched within 24 hours. Postage and packing is completely free for orders over £100*. Out of stock items will be dispatched as soon as they become available, out of stock items can take between 4 to 21 days for dispatch.
Orders are sent via our couriers' DPD on a next-day-delivery service and usually, take between 1 and 3 days.
*We ship free of charge to mainland UK addresses, excluding the Scottish Highlands or 'Out-Of-Reach' Scottish locations. Please consult the post-codes below to see if your location falls within this category. If you are still unsure, please contact us on 01432 354921. We also ship to Northern Ireland, Channel Islands, Scilly Isles, Scottish Isles and Scottish Highlands, however, delivery to these locations will incur a charge and can only be sent via a 2-day service.
- Press & Awards
YOU MAY ALSO LIKE
Regular Price: £4,495.00
Special Price £4,295.00