Select Store

Audio Technica VM530EN/H Dual Moving Magnet Cartridge

Free UK Delivery



Audio Technica VM530EN/H Dual Moving Magnet Cartridge 

The VM530EN is a top-end elliptical stylus cartridge in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM530EN is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s lightweight 0.3 x 0.7 mil elliptical nude stylus reduces the execution mass of the vibration system, enabling fuller frequency reproduction and less tracking distortion than a bonded stylus. Includes mounting hardware. This cartridge is fitted with the pre-assembled, lightweight aluminium headshell (AT-HS10) for a quicker, easier set-up

Who is Audio Technica?

Audio Technica is a quality audio component manufacturer, has designed and developed some of the most critically acclaimed headphones, turntables and cartridges on the market since their establishment in 1962. AT build products under a common design philosophy, to provide the most durable and high performing equipment at the best possible price.

Type VM Type
 Mounting 1/2” centres
 Frequency Response 20 - 25,000Hz
 Channel Separation  27dB (1kHz)
Output Channel Balance  1.5dB (1kHz)
Output Voltage  4.0mV (1kHz, 5cm/sec.)
Vertical Tracking Angle  23˚
Vertical Tracking Force Range  1.8 – 2.2g (2.0g standard)
Stylus Shape  Elliptical Nude
Stylus Size  0.3 x 0.7 mil
Stylus Construction   Nude Round Shank
Cantilever  Aluminium Pipe
Coil Impedance  2,700Ω (1kHz)
Static Compliance 35 x 10-6 cm/dyne
Dynamic Compliance 8 x 10-6 cm/dyne (100Hz)
Recommended Load Impedance 47,000Ω
Recommended Load Capacitance 100 – 200pF
Weight  6.4g
Dimensions  17.3 (H) x 17.0 (W) x 28.2 (L) mm
Replacement Stylus VMN30EN
Accessories Included  Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2

Providing your item is in stock, the order is usually dispatched within 24 hours. Postage and packing is completely free for orders over £100*. Out of stock items will be dispatched as soon as they become available, out of stock items can take between 4 to 21 days for dispatch.


Orders are sent via our couriers' DPD on a next-day-delivery service and usually, take between 1 and 3 days. 


Please use this link to find more detailed delivery information.


*We ship free of charge to mainland UK addresses, excluding the Scottish Highlands or 'Out-Of-Reach' Scottish locations. Please consult the post-codes below to see if your location falls within this category. If you are still unsure, please contact us on 01432 354921. We also ship to Northern Ireland, Channel Islands, Scilly Isles, Scottish Isles and Scottish Highlands, however, delivery to these locations will incur a charge and can only be sent via a 2-day service.