DALI Opticon LCR On-Wall Loudspeaker - Single

DALI Opticon LCR On-Wall Loudspeaker - Single

Free UK Delivery

Priced Individually


* Required Fields




DALI Opticon LCR Wall Mounted Speaker

Opticon LCR is a wall-mounted speaker which takes technologies and design influences from DALI’s Rubicon LCR & Menuet speakers to produce a sound which completely defies the size of the cabinet. Opticon LCR is capable of producing surprisingly rich and deep bass even while mounted directly to the wall, by using a bass reflex port which works in harmony with the back wall. This tuned bass port provides a significant increase in bass performance, allowing the Opticon LCR to sound like a much larger speaker.

Key Features

- Powerful Low-Loss 6 ½ Inch Wood Fibre Driver

- Wide-Dispersion Lightweight Soft Dome Tweeter

- Open & Clear Ribbon Tweeter

- Three High-Quality Vinyl Finishes

- Unique SMC Based Driver Motor System

- Rear Bass Reflex Ported

Sold Singly


This powerful speaker can be used in almost any situation. As the name suggests, Opticon LCR can be used as a Left, Centre & Right channel speaker in surround sound systems. This is as the hybrid tweeter module is rotatable, allowing the speaker to be used in both a landscape and portrait orientation.


What is DALI’s Opticon Series?

Opticon is DALI’s midrange series, bringing the materials and technologies used in their high-end Rubicon & Epicon series to a much more accessible price point, without losing the signature DALI sound. All Opticon speakers feature DALI’s powerful & accurate made in house wood fibre drivers, coupled with their wide dispersion tweeters, some of which are reinforced by a ribbon tweeter, adding further detail and depth to the top end. 

Their low loss wood fibre drivers are, like every DALI driver, incredibly easy to drive, producing accurate & true to life sound with ease. These drivers are coated in DALI’s distinctively coloured wood fibre, which lowers surface resonance and increases rigidity. The cones are then surrounded by a very soft and flexible rubber, which allows the driver to move freely with no dampening, loss or interference.

Like their Rubicon and Epicon speakers, the woofer motors in Opticon speakers feature a pole piece constructed entirely of DALI’s patented SMC material. This Soft Magnetic Compound, is a coated magnetic granule material which can be easily shaped and moulded. The benefits of using SMC, instead of the traditional iron magnets found in conventional speakers, is a significant reduction in distortion and a much more transparent & lifelike sound.

Opticon LCR, Vokal,5, 6 & 8 feature DALI’s hybrid tweeter module, a combination of soft dome & ribbon tweeter for a wide dispersion of clear high frequencies which outperform any other tweeter technology at this price point. The soft dome tweeter provides high power handling and headroom for high sound pressure levels, while the ribbon tweeter provides wide dispersion and a fast, open top end which reaches frequencies far beyond the audible range, affecting lower harmonics and improving the cohesiveness of the sound.

All Opticon speakers are assembled in Denmark, where the MDF cabinets are cut & built, the vinyl is applied and the drivers are placed and tested by hand.


Who are DALI?

DALI (Danish Audiophile Loudspeaker Industries) is, as the name suggests, a Danish company who specialises in designing, engineering & building world-class loudspeakers. All DALI speakers feature variations of their lightweight wood fibre driver design, allowing their speakers to be easily driven and create musical, smooth & accurate sound at any volume level. 

The company was founded in 1983 by Peter Lyngdorf and has since expanded from the confines of Denmark and can now be seen and heard all around the world creating DALI’s signature engaging, true to life sound which adheres to the company's slogan ‘In admiration of music’. Today, DALI offers an exciting range of speakers to suit every taste from the cost-conscious Spektor series to the high-performance Rubicon series.


Frequency Range (+/-3 dB) [Hz]   38 - 32,000
 Sensitivity (2,83 V/1 m) [dB] 88.0 
Nominal Impedance [ohms]   4
 Maximum SPL [dB]  112
 Recommended Amplifier Power [W]  40 - 300
Crossover Frequency [Hz]                  390 / 2,300 / 14,000                 
 Crossover Principle  3 + ½-way
 Hybrid tweeter module,
Super high freq. driver, Quantity
1 x 17 x 45 mm 
 Hybrid tweeter module,
Super high freq. driver, Diaphragm type
 Hybrid tweeter module,
High-frequency driver, Quantity
1 x 28 mm 
 Hybrid tweeter module,
High-frequency driver Diaphragm type
Soft Textile Dome 
Midrange driver, Quantity 1 x 6 1/2"
Midrange driver, Diaphragm type Wood Fibre Cone
The low-frequency driver, Quantity 2 x 8"
Low Wood Fibre Cone Wood Fibre Cone
Enclosure type Bass Reflex 
 Bass Reflex Tuning Frequency [Hz] 29.5 
Connection Input Bi-Wiring
Magnetic Shielding No
Recommended Placement Floor
Recommended Distance From Wall [cm] 30 - 150
Dimensions With Base (HxWxD) [mm] 1140 x 241 x 450
Weight [kg] 34.8
Accessories Included Assembly Tools 
Rubber Bumpers 
Spikes M8 

Providing your item is in stock, the order is usually dispatched within 24 hours. Postage and packing is completely free for orders over £100*. Out of stock items will be dispatched as soon as they become available, out of stock items can take between 4 to 21 days for dispatch.


Orders are sent via our couriers' DPD on a next-day-delivery service and usually, take between 1 and 3 days. 


Please use this link to find more detailed delivery information.


*We ship free of charge to mainland UK addresses, excluding the Scottish Highlands or 'Out-Of-Reach' Scottish locations. Please consult the post-codes below to see if your location falls within this category. If you are still unsure, please contact us on 01432 354921. We also ship to Northern Ireland, Channel Islands, Scilly Isles, Scottish Isles and Scottish Highlands, however, delivery to these locations will incur a charge and can only be sent via a 2-day service.

Press & Awards