Quad Vena II + Quad S-1 Package
Free UK Delivery
Discontinued
Quad Vena II Integrated Amplifier
The new Quad Vena II has seen some significant improvements over the old Quad Vena, unlike the old amp, the Vena II sports a Class AB power amp. The power supply has also been upgraded to a new 200VA toroidal transformer lying at the heart of the Amp; this is then followed up by 2x15000uF reservoir capacity (totalling up to 30000uF in total), helping the amp to maintain complete control of the music whilst also enabling excellent dynamic range.
Good news for Vinyl lovers as a built-in phonostage for moving magnet cartridges - a high quality, low noise, JFET-based circuit with precise RIAA equalisation. Not forgetting headphone users. The original Quad Vena included a headphone output, the difference between these two amps is that in the previous version had its headphone output connected to the amps main output stage rather than to a specialised headphone amp circuit like the Vena II has. Another neat feature that the Vena II has is that incorporates a dedicated headphone amp with current-feedback its gain bandwidth and high slew rate delivering a more dynamic, detailed and engaging performance with all manner of headphone types.
The preamp section is primarily kept as simplistic as can be to maintain signal purity, with line input signals passing to a precision analogue volume stage controlled by a precision motorised ALPS potentiometer. Quads engineers have put a huge amount of effort into the physical layout of the Vena II's circuitry, protecting the sensitive preamp from any sort of noise interference. The Quad Vena II has built-in Bluetooth wireless streaming with support from the aptX codec to ensure that easy pairing with all manner of smartphones, tablets, MAC's and PCs
Quad S-1 Bookshelf Loudspeakers
Quad's S Series of loudspeaker models are an embodiment of the company's commitment to bringing the listener as close to the performance as possible. Featuring new ribbon design tweeter units, advanced Kevlar bass/midrange drivers and a sophisticated crossover, each S series speaker is able to offer a detailed and dynamic performance to suit your room requirements and budget.
The S-1 is one of two stand-mount models in the S series and features a high-quality 100mm bass/midrange driver built from Kevlar. The Kevlar material allows for an extremely rigid cone, that is both firms yet light, allowing it to push vast amounts of an hour while also responding quickly. This cone works hand-in-hand with the S-1's Quad-specific ribbon tweeter design. Quad has been using ribbon tweeters in their loudspeaker models for a long time, the first one being the 'Corner Ribbon' which was first used in 1949. the S-1's tweeter is considerably more advanced than this though and uses a sandwich construction design. This makes it far more robust and easily matched with high powered amplifiers.
Quad Vena II
Preamplifier Section |
|
Analogue Inputs |
2x line-level RCA / 1x MM Phono |
Analogue Outputs | 1 x RCA (pre-out) |
Analogue Input Sensitivity | 450mV (line-level) / 4.1mV (MM Phono) |
Analogue Input Impedance | 10kΩ (line-level); 47kΩ / 100pF (MM Phono) |
Frequency Responce |
20Hz-20kHz (+/- 0.5dB) |
Total Harmonic Distortion | < 0.002% |
Signal-To-Noise | > 110dB (A-Weighted) |
Power Amplifier Section | |
Power Output | 2 x 45W RMS (8Ω, 30W) |
Frequency Response | 20Hz - 20kHz (+/- 0.5dB) |
Total Harmonic Disortion (THD) | < 0.005% (30W, 8Ω) |
Signal to Noise | > 108dB (A-weighted) |
Digital Section | |
DAC Chip | ESS Sabre32 ES9018K2M |
Digital Inputs | 2x Optical; 1x Coaxial; 1x USB Type A; aptX Bluetooth |
Max Sampling Frequency - USB | 384khz PCM; DSD256 |
Max Sampling Frequency - Optical/Coaxial | 192kHz |
Digital Outputs | 1x Coaxial; 1x Optical |
Quad S-1 Loudspeakers
Configuration | Two-way standmount |
Tweeter | 12x45mm True Ribbon |
Midrange (or bass/mid) driver | 100mm woven Kevlar |
Bass drivers | / |
Bass system | Reflex port |
Sensitivity (2.83V @ 1m) | 84dB |
Recommended amp power | 25-100W |
Nominal impedance | 8 Ohms |
Frequency response (+/-3dB) | 58Hz ~ 20kHz |
Bass extension (-6dB) | 55Hz |
Crossover frequency | 3.2kHz |
Cabinet volume | 8.15L |
Dimensions (HxWxD) | 285x156x240mm |
UK Delivery
Providing your item is in stock, the order is usually dispatched within 24 hours. Postage and packing is completely free for orders over £99*. Out of stock items will be dispatched as soon as they become available, which can take between 4 to 21 days
UK Delivery orders are sent via our couriers' DPD Local on a next-day-delivery service and usually take between 1 and 3 days.
Local Delivery
Certain manufacturers disallow mail order for their products, however a local delivery may be possible.
We offer a local delivery service for a large number of our products. After your order has been placed, a member of the Hifi Gear team will contact you to arrange a convenient date and time for your local, personal delivery.
Click & Collect
We offer a free ‘Click & Collect’ service on all items. As soon as your order has been completed and is ready for collection a member of our team will be in contact with you. Orders can be collected from our store at 11 King Street, Hereford, HR4 9BW.
Please use this link to find more detailed delivery information or contact us for more details