Exposure XM HP Headphone Amplifier

Exposure XM HP Headphone Amplifier

Free UK Delivery



* Required Fields



Exposure XM HP Headphone Amplifier

The Exposure XM HP Headphone Amplifier has a custom-made toroidal power transformer, the body casework is made out of high-quality aluminium with an extruded front panel. The resistors and capacitors are used in the signal path to ensure the highest quality. All of the audio outputs are discrete with high drive capability for low impedance headphones.

The XM HP features 2 pairs of 1/4 inch jacks and 2 pairs of XLR sockets allowing 2 pairs of headphones to be used at one time. The XM HP is also equipped with two RCA phono inputs as a moving magnet phono stage for your turntable! On the rear of the amplifier are many digital connections, including two coax and two optical inputs and a Class 2 USB input with DSD.

Also featuring a separate pre-amp output which could be used to input into a power amplifier to drive a pair of speakers. 

Who is Exposure?

Exposure is an established manufacturer of quality hifi stereo components, based in the south of England. Exposure Electronics' vast catalogue of outstanding audiophile amplifiers, DACs and CD players are built to last, using construction methods perfected over four decades of research and design. It's this uncompromising level of craftsmanship and sonic superiority that sets Exposure out from the crowd, making it one of the more sought out British hifi brands on the market.

Analogue Inputs -
AUX/PH input MM
2.5mV @ 1KHz, 47K ohms S/N > 73dB
 Frequency Response +/-0.5dB 50Hz-20KHz. High pass roll off -1.5dB @ 20Hz
 AUX 2 & AUX 3 input line 350mV @ 1KHz > 14K ohms output gain x3.75, +11.5dB
 Total Harmonic Distortion  <0.005% at 1KHz : @ 1.3V RMS output
 Frequency Response 20Hz - 20KHz +/- 0.5dB
 Signal to Noise Ratio ref 1.3V RMS Output 1KHz >92dB
 Channel Separation @ 20KHz  >60dB
Digital Inputs  -
 SPDIF inputs BNC Coax & Optical 32 - 192KHz @ 16-24 bits
 Total Harmonic Distortion  <0.005% at 1KHz @ 1.3V RMS output
Signal to Noise Ratio ref 1.3V RMS Output 1KHz : >98dB
USB input   Linear PCM 44K1 - 192KHz @ 16-24 bits
DSD x64 (DoP) Asynchronous transfer from host
Headphone Output -
Output Impedance < 5 ohms
Maximum Level into 33 ohms load @ 1KHz & 0.01% THD : 7V RMS (1.5W)
Total Harmonic Distortion
@ 2V output, 1KHz : <0.003% (120mW)
Maximum Level into 330 ohms @ 1KHz & 0.01% THD : 7.5V RMS (170mW)
Total Harmonic Distortion  @ 2V output, 1KHz : <0.003% (12mW)
Load Impedance total all outputs 16 ohms minimum
General Specifications
Mains Supply 110/120V or 220/240V @ 50/60Hz (factory set)
Power Consumption <15W
Dimensions (WxHxD) 218mm x 89mm x 363mm (inc knob)
Net Weight (unpacked) 4kg
Gross Weight (packed) 5kg

Providing your item is in stock, the order is usually dispatched within 24 hours. Postage and packing is completely free for orders over £100*. Out of stock items will be dispatched as soon as they become available, out of stock items can take between 4 to 21 days for dispatch.


Orders are sent via our couriers' DPD on a next-day-delivery service and usually, take between 1 and 3 days. 


Please use this link to find more detailed delivery information.


*We ship free of charge to mainland UK addresses, excluding the Scottish Highlands or 'Out-Of-Reach' Scottish locations. Please consult the post-codes below to see if your location falls within this category. If you are still unsure, please contact us on 01432 354921. We also ship to Northern Ireland, Channel Islands, Scilly Isles, Scottish Isles and Scottish Highlands, however, delivery to these locations will incur a charge and can only be sent via a 2-day service.

Press & Awards