Enquire Contact form
DetailsHaving a high output and exceptional tracking which means it stays locked into the groove and is ideal for scratching ,this cartridge requires a headshell.
Output voltage at 1000 Hz, 5cm/sec. 7 mV
Channel balance at 1 kHz, 1,5 dB
Channel separation at 1 kHz, 25 dB
Channel separation at 15 kHz, 15 dB
Frequency range at - 3dB, 20-20.000 Hz
Frequency response 20-15.000 Hz +2 / -3 dB
FIM distortion at recommended tracking force, DIN 45.542, 1 %
Tracking ability at 315Hz at recommended tracking force, 80 µm
Compliance, dynamic, lateral 6 µm/mN
Stylus type Spherical
Stylus tip radius, R 18 µm
Equivalent stylus tip mass 0,6 mg
Tracking force range 3,0-5,0 g (30-50 mN)
Tracking force, recommended 4,0 g (40 mN)
Tracking angle 20∞
Internal impedance, DC resistance 750 Ohm
Internal inductance 450 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 200-600 pF
Cartridge colour, body/stylus Neon red / Neon red
Cartridge weight 5 g
Replacement stylus unit Scratch
Providing your item is in stock, the order is usually dispatched within 24 hours. Postage and packing is completely free for orders over £100*. Out of stock items will be dispatched as soon as they become available, out of stock items can take between 4 to 21 days for dispatch.
Orders are sent via our couriers' DPD on a next-day-delivery service and usually, take between 1 and 3 days.
*We ship free of charge to mainland UK addresses, excluding the Scottish Highlands or 'Out-Of-Reach' Scottish locations. Please consult the post-codes below to see if your location falls within this category. If you are still unsure, please contact us on 01432 354921. We also ship to Northern Ireland, Channel Islands, Scilly Isles, Scottish Isles and Scottish Highlands, however, delivery to these locations will incur a charge and can only be sent via a 2-day service.
- Press & Awards