DJ's all over the world claim very high demands to their professional equipment, among which the cartridges ``plays" their decisive part by realizing the scratching, back-cueing, and live artistic performance, as a big part of the show. Reliability and robustness is vital, when the cartridges night after night will have to withstand these demands in environments with extreme sound pressure and vibration.
Scratching and back-cueing impose heavy mechanical stress on the cantilever and its rubber bearing. Therefore, the Ortofon disco cartridges are equipped with cantilevers made from aluminum tube with increased wall thickness. Special attention has also been paid to the attachment of the bearing and the design of the bearing itself. This means that rough treatment will neither damage the cartridge nor degrade its stability.
The OrtofonPro cartridges were the first to combine the unrivaled Ortofon sound quality with the ruggedness that is a must for professional use.
Output voltage at 1000 Hz, 5cm/sec.: 7 mV
Channel balance at 1 kHz: 1.5 dB
Channel separation at 1 kHz: 25 dB
Channel separation at 15 kHz: 15 dB
Frequency range at - 3dB: 20-20,000 Hz
Frequency response: 20-15,000 Hz + 3 / - 2 dB
FIM distortion at recommended tracking force, DIN 45.542: 1 %
Tracking ability at 315Hz at recommended tracking force: 80 µm
Compliance, dynamic, lateral: 6 µm / mN
Stylus type: Spherical
Stylus tip radius: R 18 µm
Equivalent stylus tip mass: 0.6 mg
Tracking force range: 3.0-5.0 g (30-50 mN)
Tracking force, recommended: 4.0 g (40 mN)
Tracking angle: 20 degrees
Internal impedance, DC resistance: 750 Ohm
Internal inductance: 450 mH
Recommended load resistance: 47 kOhm
Recommended load capacitance: 200-600 pF
Cartridge color, body/stylus: Neon red / Neon red
Cartridge weight: 18.5 g
Frequency Response :20-20000Hz
Output @ 1kHz :7 mV
Channel Separation @ 1kHz :25 dB
Tracking Ability :80 µm
Stylus Tip Type :Spherical
Tracking Force :4.0g (40 mN)
Inductance :450 mH
Cartridge Weight :18.5g
Recommended Load :47 kOhm
Replacement Stylus :Scratch
Providing your item is in stock, the order is usually dispatched within 24 hours. Postage and packing is completely free for orders over £100*. Out of stock items will be dispatched as soon as they become available, out of stock items can take between 4 to 21 days for dispatch.
Orders are sent via our couriers' DPD on a next-day-delivery service and usually, take between 1 and 3 days.
Please use this link to find more detailed delivery information.
*We ship free of charge to mainland UK addresses, excluding the Scottish Highlands or 'Out-Of-Reach' Scottish locations. Please consult the post-codes below to see if your location falls within this category. If you are still unsure, please contact us on 01432 354921. We also ship to Northern Ireland, Channel Islands, Scilly Isles, Scottish Isles and Scottish Highlands, however, delivery to these locations will incur a charge and can only be sent via a 2-day service.