Select Store

Ortofon MC Windfeld Cartridge

Free UK Delivery

In stock

Ortofon are a Danish manufacturer of high quality phono cartridges, designed to get the very most out of your vinyl collection from a variety of price points. Ortofon cartridges, both Moving Magnet and Moving Coil configuration are commonly found supplied with high quality ProJect turntable models, but Ortofon cartridges sound exceptional with any compatible turntable.

Moving Coil cartridges feature an inverted version of the Moving Magnet design. Instead of a magnet sitting on the end of the cantilever between two coils, the coils are attached the cantilever and a magnet is placed near them. Because space within the cartridge at this level is extremely limited, the coils are made from an exceptionally fine wire. The coils tiny size results in a very low output. Equipped with a Replicant 100 stylus and a conical aluminium cantilever, the Ortofon Cadenza Bronze moving coil cartridge is a superbly accomplished musical performer. Ortofon Aucurum wire forms the special coil material for transparent natural sound. For superior musical reproduction at the highest level, look no further than this superb cartridge.

Named after the famous Ortofon designer Per Winfeld, the Ortofon Winfeld MC Cartridge utilises some of the most advanced mechanical and electrical technology available in the world today, to create a moving coil cartridge of amazing resolution and speed. With a design based on the Kontrapunkt series, this cartridge has perfect mechanical integration with the headshell/ tonearm due to the presence of three raised 'dots' on the mounting surface.

A single, non-resonant alloy block leads all the way from mounting point to the stylus cantilever support, which ensures all of the groove information is transferred into a perfect electrical signal, ensuring the listener is rewarded with the finest sound quality possible.Fitted with a Boron cantilever and a highly polished version of the Ortofon Replicant stylus 100, tracking ability is superb.


 Output voltage at 1000 Hz, 5cm/sec.  0.3mV
Channel balance at 1 kHz  <0.2dB 
 Channel separation at 1 kHz <28dB 
 Channel separation at 15 kHz <22dB 
Frequency range at - 3dB  10Hz - 80,000Hz 
 Frequency response FIM distortion at recommended 20-20.000 Hz + / - 1 dB 
 Tracking ability at 315Hz at recommended tracking force *)  100 µm
 Compliance, dynamic, lateral 16 µm/mN 
 Stylus type Nude Ortofon Replicant 100, special polished 
 Stylus top Radius r/R 5/100 µm 
 Tracking Force  2.3-2.8 g (23-28 mN) 
Tracking force, recommended 2.6g (26 mN)
Tracking Angle 23°
Internal impedance, DC resistance 4 Ohm 
Recommended load impedance >10 Ohm 
Cartridge body material  Stainless Steel / Specialised Alloy 
Cartridge colour Black 
 Cartridge weight 13g 


2,3-2,8 g (23-28 mN)

Providing your item is in stock, the order is usually dispatched within 24 hours. Postage and packing is completely free for orders over £100*. Out of stock items will be dispatched as soon as they become available, out of stock items can take between 4 to 21 days for dispatch.


Orders are sent via our couriers' DPD on a next-day-delivery service and usually, take between 1 and 3 days. 


Please use this link to find more detailed delivery information.


*We ship free of charge to mainland UK addresses, excluding the Scottish Highlands or 'Out-Of-Reach' Scottish locations. Please consult the post-codes below to see if your location falls within this category. If you are still unsure, please contact us on 01432 354921. We also ship to Northern Ireland, Channel Islands, Scilly Isles, Scottish Isles and Scottish Highlands, however, delivery to these locations will incur a charge and can only be sent via a 2-day service.