What is it?
The RCP07 is a wireless 7 button wall mounted control panel providing 4 preset scenes plus off and master raise lower controls. The RCP07 also has full scene programming capability. The RCP07 communicates with other Rako devices, such as the RD range of dimmer modules, using coded FM radio data transmission, ensuring reliable interference free operation. Rakom coded radio transmission eliminates the need for any data or power cabling ensuring that the system can be installed with the minimum of fuss and disruption. RCP panels are designed to be mounted anywhere, be it flush mounting to UK back-boxes or simply surface mounted to any flat surface using the patress provided. The universal backing plate even allows the RCP panel to be mounted over European back-boxes. Face plates come in a variety of standard finishes including: white, charcoal grey, brushed stainless steel, mirror stainless steel and polished brass.
4 preset scene selection and off plus master raise lower
256 house 256 room addresses
15 channel/circuit control (Up to 60 channels accessible using Rasoft software)
Non volatile memory storage
Smooth cross fading between scenes
Simple system configuration can be performed by non technical staff
House, room and channel addresses can be set without the need for a PC
Scenes levels can be programmed from the Scene Sender control panel
Easy installation without the need for control cabling. Leave existing wiring intact
Sends scene instructions using coded wireless FM radio communication with auto repeat and error correction
Transmitting range of 15m in building (100m line of sight)
Long battery life (in excess of 3 years), easily replaced by the user
Low battery warning by LED indication
Four standard face plate finishes: white, brushed stainless steel, mirror stainless steel, and polished brass
Many additional non standard finishes available upon request
Flush mounting to UK back boxes
Low profile surface mounting to UK and European back boxes or direct to flat surfaces
RCP07-W 7-button controller complete with white surround and faceplate
RCP07-C 7-button controller complete with charcoal grey surround and faceplate
RPP07-SS 7-button brushed stainless steel cover plate and fixing set
RPP07-PB 7-button polished brass cover plate and fixing set
RPP07-MS 7-button mirror stainless steel cover plate and fixing plate
Control panels that can be mounted anywhere
Simple to retro-fit to existing conventionally wired schemes
An elegant single gang design to suit all interiors
Panel sends scene commands using FM communications
No disruptive and costly building work to walls and ceilings required
Installation time reduced considerably
Configured using Rako's unique addressing system
Multiple switch position control easily achieved without wires
Uses the Rakom FM network allowing interfacing with audio visual, security and other auxiliary systems
Many advanced user features accessible using Rasoft programming software
Rako RCP07 lighting control panel
Providing your item is in stock, the order is usually dispatched within 24 hours. Postage and packing is completely free for orders over £100*. Out of stock items will be dispatched as soon as they become available, out of stock items can take between 4 to 21 days for dispatch.
Orders are sent via our couriers' DPD on a next-day-delivery service and usually, take between 1 and 3 days.
Please use this link to find more detailed delivery information.
*We ship free of charge to mainland UK addresses, excluding the Scottish Highlands or 'Out-Of-Reach' Scottish locations. Please consult the post-codes below to see if your location falls within this category. If you are still unsure, please contact us on 01432 354921. We also ship to Northern Ireland, Channel Islands, Scilly Isles, Scottish Isles and Scottish Highlands, however, delivery to these locations will incur a charge and can only be sent via a 2-day service.