Rega P1 Plus + Wharfedale Diamond A1 Package
Free UK Delivery
Discontinued
Rega P1 Plus
The new Rega P1 Plus is one of the first ever Rega turntable to include an integrated moving magnet phono stage, using the same Plinth, Platter, Tone Arm (The RB110) and the same Carbon Cartridge as the Planar 1, we already know that this turntable is going to be a huge hit as the Planar 1 is so successful.
The Built-in Phono Stage
The Built-in phono stage in the P1 Plus is a high specification pre-amplifier. This amp is designed to amplify the signal from a moving magnet cartridge to a suitable level for all line level inputs of an appropriate system or an audio amplifier. What this allows is a simple connection to a wide variety of products which use a standard twin phono to phono lead (which is supplied) or a 3.5mm plug (which is not supplied).
Tonearm
The brand new RB110 tonearm is built with Rega's new bespoke, zero play bearings design; what this causes is an ultra-low friction performance. The new bias assembly and integrated arm clip include an automatic bias adjustment which removes the need for the user to set bias, making this the most 'Plug and Play' turntable Rega have ever manufactured. New ergonomically, re-designed and stiffer headshell for improved usability and appearance.
Cartridge
The P1 Plus uses the Rega Carbon Moving Magnet Cartridge - this is supplied as standard on the purchase
Motor
The motor on the P1 Plus consists of a 24v, synchronous AC motor with a new PCB and aluminium pulley which offers low noise and better speed stability.
Plinth
The brand new Thermoset, gloss laminated plinth with incredible detail put into its appearance now features a positioned on/off switch which is located on the underside of the turntable. The two plinth finishes available are Gloss Black and Gloss White.
Central Bearing Housing
The re-designed brass main bearing will offer a vastly improved fit and will remove a lot of stress on the bearing itself, whilst minimising the transfer of potential energy at the same time.
Platter
Keeping it simplistic with a 23mm, high mass, phenolic platter with an improved flywheel effect for more enhanced and improved stability.
Re-Designed Feet
The feet on the P1 Plus have been completely reworked to greatly increase the amount of stability the turntable has and to reduce, if not completely remove any sort of vibration transfer.
Motor Cover Tray
The newly designed motor cover tray comes with integrated cooling to keep the turntable steady.
Balance Weight
New 111g ‘Plug and Play’ balance weight.
Rega P1 Plus
Power Consumption | 50 Hz: 24 VAC 0.142 mA maximum power consumption 3.4 W. 60 Hz: 24 VAC 0.129 mA maximum power consumption 3.1 W. |
Maximum Output Level (3.54 cm/s RMS 45 degrees CBS STR100 Band 6a and 7a) | 370-410 mV |
Output Impedance | 1 kΩ |
Frequency Response (pre-amplifier only) |
14 Hz (-3 dB Point) to 100 kHz (-0.6 dB Point) |
RIAA Accuracy (pre-amplifier only) | (100 Hz to 20 kHz) ± 0.4 dB typically better than ± 0.25 dB |
Pre-amplifier Gain | 40 dB |
Pre-amplifier Input Loading | 47 kΩ in parallel with 220 pF |
Signal to Noise Ratio | -75 dB A-weighted ref maximum output. |
Power Requirements |
50 Hz 24 V AC 0.142 mA 3.4 W – 60 Hz 24 V AC 0.129 mA 3.1 W |
Dimensions (lid closed) | H 11.7 x W 44.7 x D 36 cm |
Weight | 4.35kg |
Wharfedale Diamond A1
Type | Bookshelf |
Driver Layout | Two-Way |
Driver Size | 130/25 |
Ported | Passive Radiator |
Frequency Response | 55Hz-20kHz |
Maximum Output | 95dB |
Power Output (Active Only) | 100 watts |
Width | 220 mm |
Depth | 186mm |
Height | 315 mm |
Remote Control | Yes |
Network Connection | WiDi |
Bluetooth | Aptx |
UK Delivery
Providing your item is in stock, the order is usually dispatched within 24 hours. Postage and packing is completely free for orders over £99*. Out of stock items will be dispatched as soon as they become available, which can take between 4 to 21 days
UK Delivery orders are sent via our couriers' DPD Local on a next-day-delivery service and usually take between 1 and 3 days.
Local Delivery
Certain manufacturers disallow mail order for their products, however a local delivery may be possible.
We offer a local delivery service for a large number of our products. After your order has been placed, a member of the Hifi Gear team will contact you to arrange a convenient date and time for your local, personal delivery.
Click & Collect
We offer a free ‘Click & Collect’ service on all items. As soon as your order has been completed and is ready for collection a member of our team will be in contact with you. Orders can be collected from our store at 11 King Street, Hereford, HR4 9BW.
Please use this link to find more detailed delivery information or contact us for more details