Enquire Contact form
Naim NAP 500DR Power Amplifier
After seventeen successful years at the top of Naim's amplifier range, the NAP 135 was eclipsed by the flagship NAP 500. Our design brief for the NAP 500 required an amplifier that could drive any load down to 2 Ohms for prolonged periods, deliver over 100W into 8 Ohms and sound - at the very least - as good as our reference at the time, the NAP 135. Needless to say, every aspect of the NAP 500's sound quality is truly exceptional.
To avoid the compromises implied by the use of multiple sets of output devices, either in totem-pole or parallel configuration, the search was on for a very special output transistor. A bipolar transistor with a specific combination of very high current, power rating and bandwidth was needed, far in excess of anything available to Naim before. A suitable output device was eventually developed after six years' collaboration with a semiconductor manufacturer.
From an early stage of conception it was decided to use bridged amplifiers for each channel of the NAP 500. This allowed the design to have maximised open and closed loop speed, less intrusive protection circuitry and reduced interaction between input and output signals as the very high drive currents to the loudspeaker do not flow through the system earth.
Naim has always understood the importance of reducing supply-induced intermodulation distortions and mains harmonic electrical noise from an amplifier, and has always used regulated supplies in its premier amplifiers. It was considered likely that improvements in these areas would yield further large gains in performance. Each channel of the NAP 500 includes ten stages of local regulation. To reduce interference from the mains supply further, the transformer and first stages of the power supply are in a separate enclosure (the same size as a SuperCap), which provides twelve raw D.C. supplies for the power amplifier. Hence, the NAP 500 system consists of two boxes, a stereo amplifier and a separate power supply.
All new circuit topology has been developed to maximise bandwidth and reduce distortions and power supply dependency. Also, special attention has been paid to reducing thermally-induced noise, an especially important consideration in power amplifiers. A variable speed intelligent fan system provides discreet extra cooling if needed.
The performance of the finished amplifier exceeds the design brief in all areas. Power output per channel is over 140W into 8 ohms and compared with the NAP 135, which in itself already provided exemplary measurements, the NAP 500 has five times the internal bandwidth, a quarter of the distortion and a one hundred times reduced operating noise floor.
Audio Inputs - Analogue Input 2 x XLR Input Impedance 18kΩ Audio Outputs - Gain +30dB Frequency Response -3dB at 1.5Hz and 100kHz Minimum Load Impedance 2Ω Speaker Outputs - Speaker Outputs L & R, 4mm “banana” sockets Power Output 140W/channel, 8Ω Transient 700VA Power - Mains Supply 100V, 115V, 230V; 50 or 60Hz Power Supply Options 500PS Physical - Dimensions (HxWxD) 160 x 432 x 374 mm Weight 25 kg Shipping Dimensions 270 x 570 x 520 mm Shipping Weight 28.2 kg Supplied with 500PS,
Brushed and black anodised
Brushed and black anodised
Providing your item is in stock, the order is usually dispatched within 24 hours. Please remember that postage and packing is completely free for orders over £50*. Out of stock items will be dispatched as soon as they become available, out of stock items can take between 4 to 21 days for dispatch.
Deliveries usually take 1-3 working days. The majority of orders are sent via our couriers'; Interlink Express on a next-day-delivery service. Smaller, low value or light-weight items are normally posted using Royal Mail Recorded or Royal Mail Special Delivery.
Once your product has been dispatched, you will be notified via email and sent a unique consignment number, you can use this number at http://www.interlinkexpress.com to check the status of your delivery. If you have provided a mobile telephone number, Interlink's Predict service will notify you by text (and email) of a one-hour delivery window. If the window they suggest is inconvenient, you can change the date of delivery to a later one via text or email.
*We ship free of charge to mainland UK addresses, excluding the Scottish Highlands or 'Out-Of-Reach' Scottish locations. Please consult the post-codes below to see if your location falls within this category. If you are still unsure, please contact us on 01432 354921. We also ship to Northern Ireland, Channel Islands, Scilly Isles, Scottish Isles and Scottish Highlands, however delivery to these locations will incur a charge and can only be sent via a 2-day service.
Shipping Costs Mainland UK (Next-Day) Offshore/Out-of-reach (2-day)Northern Ireland, Channel Islands, Isle of Man, Scottish Islands, Scilly Islands Republic of Ireland (2-day) Under £50 Orders £7.50 £12.50 £15.00 Over £50 Orders FREE £19.99 £29.99 Surcharge Orders £50.00 £69.99 £79.99 Saturday Delivery £12.99 N/A N/A Sunday Delivery £12.99 N/A N/A Saturday by 12 Delivery £35 N/A N/A
Post codes exempt from the free delivery service include:
Scottish Highlands Post Codes: AB30-38, AB41-42, AB44-56, FK17-99, G83, IV1-28, IV30-39, IV52-54, IV63, KW1-14, PA21-33, PA34-40, PH15-26, PH31-41, PH49-50
Islands Post Codes: HS1-9, IV40-51, IV55-56, KA27-28, KW15-17, PA20, PA41-49, PA60-78, PH42-44, ZE1-3
Northern Ireland: All BT postcodes
Channel Islands Post Codes: JE, GY
Scilly Isles Post Codes: TR21, TR22, TR23, TR24, TR25
- Press & Awards