Project Amp Box DS2 Mono
Free UK Delivery
Discontinued
Project Amp Box DS2 Mono
The Amp Box DS2 Mono is built around a highly efficient, low-energy Class D amplifier module that delivers high output power, giving it the ability to drive even very demanding speakers. This simple yet effective single-channel power amplifier is capable of delivering a very clean, pure sound performance with minimal electrical interferences.
The Amp Box DS2 Mono meets Pro-Ject’s exacting standards for sonic ability, which results in a spacious soundstage that picks up on fine dynamic details and provides plenty of power to fill a typical listening room with sound. The design team took inspiration from tube amplifiers when designing all their amplifiers, resulting in a realistic, musical performance. The sophisticated internal design of the Amp Box DS2 Mono uses a four-layer PCB, which accounts for the noticeable upgrade in sound quality compared to the previous Amp Box DS.
For easy integration into a system, the Amp Box DS2 Mono has two isolated speaker terminals on the back panel and a Loop Output for passing the audio signal onto another device. The trigger link allows for the amplifier to be turned on when a connected Pre Box DS2 is switched on, making operation even easier. The Amp Box DS2 Mono perfectly complements the DS2 pre-amplifier models, but its sound quality and efficiency also makes them viable for other types of systems.
Who is Project?
It's no secret that ProJect design and engineer some of the most critically acclaimed turntables and turntable accessories in the market. In an effort to prove themselves in other aspects of hifi, ProJect have released their 'Box Design' series; a collective of amplifiers, CD players, iPod docks and more - all of which exist in astonishingly compact cabinets. These compact units can be combined with dedicated shelf cabinets to form a tidy mini-system appearance while retaining the quality and 'ease-of-upgrade' of hifi separates.
Output power | 120W / 205W @ 8 / 4 ohm |
Frequency response | 10Hz - 50kHz (0dB, - 3dB) |
Channel separation | >40dB @ 20kHz |
Noise floor | >90dB |
THD | < 0.1% @ 90W |
Gain | 31dB |
Line level input | 1x RCA |
Loop Output | 1x RCA |
Input sensitivity | 550mV (100W, 4 ohm) |
Input impedance | 10kohm |
Speaker out | 4mm Ø bananas, spades or bare wire |
Trigger | 12V switching voltage |
Trigger in and out | 2-pole coaxial jack Ø 2,5mm |
External power supply | 48V/2,5A DC; 100 - 240V, 50/60Hz |
Dimensions W x D x H | 206 x 194 x 68 alu finish 240 x 194 x 69 wood finish |
Weight | 1440g (alu); 1900g (wood) |
UK Delivery
Providing your item is in stock, the order is usually dispatched within 24 hours. Postage and packing is completely free for orders over £99*. Out of stock items will be dispatched as soon as they become available, which can take between 4 to 21 days
UK Delivery orders are sent via our couriers' DPD Local on a next-day-delivery service and usually take between 1 and 3 days.
Local Delivery
Certain manufacturers disallow mail order for their products, however a local delivery may be possible.
We offer a local delivery service for a large number of our products. After your order has been placed, a member of the Hifi Gear team will contact you to arrange a convenient date and time for your local, personal delivery.
Click & Collect
We offer a free ‘Click & Collect’ service on all items. As soon as your order has been completed and is ready for collection a member of our team will be in contact with you. Orders can be collected from our store at 11 King Street, Hereford, HR4 9BW.
Please use this link to find more detailed delivery information or contact us for more details