Rega Planar 1 & IO & Bowers & Wilkins 607 S2 Speakers
Free UK Delivery
Discontinued
Rega IO & Planar 1 & Bowers and Wilkins 607 Package
This package comes with x2 2m lengths of QED 79 strand speaker cable.
Rega IO Integrated Amplifier
Key features
- 30W RMS both channels driven into the rated load of 8 Ω -
- Frequency response Phono: 15 Hz to 40 kHz (-3 dB points) / 27 Hz to 20.5 kHz (-1 dB points) -
- Input 1 (Phono) input sensitivity 2.1 mV @ 47 kΩ in parallel with 220 pF -
- Maximum input 1 (Phono) input level 100 mV -
- Input 2-3 (Line) input sensitivity 210 mV @ 47 kΩ -
- Maximum input 2-3 (Line) input level 10.25 V -
- Power consumption 135 W @ 230 V / 220 V / 115 V / 100 V into the rated load of 8 Ω -
- Dimensions (W x D X H) 180mm x 290mm x 68mm -
- Weight 2.9Kg -
Rega has set out to disrupt the sub £500 integrated amplifier market with their new IO integrated amplifier. This all-new amplifier is based on one of our favourites, the award-winning Brio. The pre-amplifier features a motorised, high-quality ALPS Blue stereo volume potentiometer, under control via both IR remote(included) or chunky front panel knob. The new IO features a high-quality Moving Magnet phono input stage, for simple connection to a turntable (We recommend the Rega Planar 1 or Planar 2), along with two additional line-level inputs for connection to a CD Player or Network Streamer. The IO also features a high-quality headphone output and a hefty 30 Watts per channel capable of driving any bookshelf speaker and even some floor standing speakers, thanks to it's generously rated toroidal mains power transformer, high current bridge rectifier and high quality, long life smoothing capacitors. The new iO amplifier pairs perfectly with Rega's new Kyte loudspeakers but would also work well with most high-quality loudspeakers on the market.
Rega Planar 1
Please note, turntables such as the Rega Planar 1 require a phono stage to work and will produce no sound without one.
Many amplifiers have built-in phono stages, such as the Rega io or Brio.
They can often be identified by the RCA input marked 'phono' on the rear of the amplifier.
If being used with active (powered) speakers or with an amplifier without an integrated phono stage, a separate phono stage such as the Rega Fono A2D or Fono MM will be required.
Key Features
- Simple Plug and Play design, set-up in less than thirty seconds -
- UK Hand-assembled RB110 tonearm -
- Low vibration motor -
- Phenolic resin, flywheel effect platter -
- Factory fitted Carbon moving magnet cartridge -
The state-of-the-art Planar 1 from Rega is the company's most user-friendly deck so far, with a preset bias force on the newly developed RB110 tonearm - the Planar 1 is essentially ready from the box. All that's required is for the balance weight to be slipped onto the back of the tonearm as far as it will go, remove the stylus guard, and then hear your music as it as intended to be heard.
Every element of the Planar 1 has been carefully and vigorously improved upon earlier designs. The Planar 1 now runs a 24v, low-noise, synchronous motor. This drastically reduces any potential vibration that may otherwise negatively affect the sound of your record. The turntable comes supplied with the RB110 tonearm as standard. This arm uses Rega's exclusive zero-bearings design Including an automatic bias adjustment negating the need for the user to set bias, making this the most ‘Plug & Play’ turntable that Rega has ever manufactured. New ergonomically, re-designed and stiffer headshell for improved usability and appearance
This is the perfect jumping-on point for anyone who is looking to get into Vinyl playback for the first time.
Comes supplied with a lid as standard
The New Bowers & Wilkins 607 S2 Bookshelf Loudspeaker
The new Bowers and Wilkins 607 bookshelf loudspeaker is the smallest addition to the 600 series, not to be fooled though, this speaker may be small but delivers pristine sound with punchy bass. The 607 features Bowers and Wilkins' award-winning Continuum cone technology which will create a pure and precise soundscape. The 607 isn't just about boasting about how exceptionally good it sounds, it also has some very nice design tweaks. This standmout speaker will sit proudly with a nice, clean look. Bowers have removed the grille pegs and replaced them with magnets, the port has been moved to the rear cabinet, creating a modern and premium aesthetic, topped with a matte finish. The finish options are Matte Black or Satin White
Priced as a pair. Stands sold separately.
Rega IO Integrated Amplifier | |
Power outputs at 230/115 V supply voltage | 30 W RMS both channels are driven into the rated load of 8 Ω |
Input 1 (Phono) input sensitivity | 2.1 mV @ 47 kΩ in parallel with 220 pF |
Maximum input 1 (Phono) input level | 100 mV |
Input 2-3 (Line) input sensitivity | 210 mV @ 47 kΩ |
Maximum input 2-3 (Line) input level | 10.25 V |
Headphone output | No load 8 V 32 Ω 1.6 V 54 Ω 2.4 V 300 Ω 5.7 V Source impedance: 109 Ω |
Power consumption | 135 W @ 230 V / 220 V / 115 V / 100 V into the rated load of 8 Ω |
Frequency response | Phono: 15 Hz to 40 kHz (-3 dB points) / 27 Hz to 20.5 kHz (-1 dB points) |
RIAA accuracy | (100Hz to 10 kHz) ±0.4 dB typically better than ±0.3 dB |
Line |
12 Hz (-1 dB points) to 43 kHz (-3 dB points) |
Remote control | Batteries included – 2 x AAA Alkaline |
Fuse ratings | T1.6 AL 250 V: 230 V / 50Hz and 220 V / 60 Hz T3.15 AL 250 V: 115 V / 60 Hz and 100 V / 50/60 Hz |
Weight | 2.9Kg |
Dimensions (W x D x H) in mm | 180 x 290 x 68 |
Planar 1
Tonearm | Hand-assembled RB110 tonearm |
Motor | High quality, low vibration motor |
Platter | Phenolic resin, flywheel effect platter |
Cartridge | Factory fitted Carbon moving magnet cartridge |
Supplied with a lid | Yes |
Bowers & Wilkins 607
Drivers | 1x ø25mm (1 in) aluminium dome high-frequency 1x ø130mm (5 in) Continuum cone bass / midrange |
Harmonic Distortion | 2nd and 3rd harmonics (90dB, 1m) <1% 110Hz - 22kHz <0.5% 180Hz - 20kHz |
Frequency Range | -6dB at 40Hz and 33kHz |
Extra | Decoupled Double Dome aluminium tweeter Continuum cone bass / midrange Flowport™ |
Finish | Black or White |
Frequency response (Hz) | 52Hz - 28kHz ±3dB |
Nominal impedance (ohms) | 8 |
Recommended amp power (watts) | 30W - 100W into 8O on unclipped programme |
Sensitivity (dB) | 84dB spl |
W x H x D (mm) | 165 x 300 x 207 |
Weight (kg) | 4.65 |
UK Delivery
Providing your item is in stock, the order is usually dispatched within 24 hours. Postage and packing is completely free for orders over £99*. Out of stock items will be dispatched as soon as they become available, which can take between 4 to 21 days
UK Delivery orders are sent via our couriers' DPD Local on a next-day-delivery service and usually take between 1 and 3 days.
Local Delivery
Certain manufacturers disallow mail order for their products, however a local delivery may be possible.
We offer a local delivery service for a large number of our products. After your order has been placed, a member of the Hifi Gear team will contact you to arrange a convenient date and time for your local, personal delivery.
Click & Collect
We offer a free ‘Click & Collect’ service on all items. As soon as your order has been completed and is ready for collection a member of our team will be in contact with you. Orders can be collected from our store at 11 King Street, Hereford, HR4 9BW.
Please use this link to find more detailed delivery information or contact us for more details