Roksan Kandy K2 Integrated Amp & Power Amp TwinPack

Roksan Kandy K2 Integrated Amp & Power Amp TwinPack

Sorry, This product is no longer available



Kandy Integrated Amp:

With 125W x 2 power output on tap, the Roksan Kandy K2 integrated amplifier is well equipped to power the most difficult loudspeakers to high levels, and deliver a high end sound quality with terrific bass punch, clarity throughout the midrange and detailed clear high frequencies. A new internal layout has bought about a whole host of sonic improvements to this award winning amplifier - the 500VA toroidal mains transformer now benefits from the screening properties of the aluminium heatsink, and additionally is positioned as far away as possible from the sensitive pre-amp circuitry.

The pre-amp section now has a dedicated regulated power supply for even lower noise, whilst the power amp circuitry has been revised and optimally laid out for maximum dynamic capability and short signal paths. Higher quality gold plated contact signal relays now route the inputs with much lower distortion and noise. The motorised Alps volume potentiometer is also re-positioned for short signal paths bringing greater realism and atmosphere to the performance.

A matching power amplifier can be added to allow bi-amping of your loudspeakers, for even greater realism and dynamic expression of your music. Fully featured loudspeaker protection is incorporated to give peace of mind, whilst a newly designed infra red remote control allows armchair control.

Kandy K2 Power Amp:

The Roksan Kandy K2 is built from the logistic ideology and technology of the K2 integrated amplifier, while setting an entirely new standard for high end power amps in its class. This power amplifier has been developed and engineered extensively to provide an exceptional performance, capable of unleashing the true beauty of the punchy and thick dynamics tempered with crystal clear, delicate elements found in even the most complex musical scored.


Integrated Amplifier: 


Inputs Line Level (x5), Moving Magnet (x1), Tape (x1), Bypass (x1)
Input Impedance 47 kΩ
Input Sensitivity (70W) (120W) Line 470mV
Line Outputs Tape, Preamplifier (x2)
Output Voltage 240mV (Tape Out)
700mV (Pre Out)
Power Outputs Loudspeaker, L & R
Output Power >125 Watts, into 8 Ohms
both channels driven
>190 Watts, into 4 Ohms
both channels driven
Power Supply 500VA Ultra Low Noise Toroidal Transformer
4 Regulated Supply Rails
Current Output 50 Amps Peak to Peak
Damping Factor >110 (8 Ohms)
Frequency Response (-3dB), <3Hz – >100kHz
Gain 37.3dB Overall (Pre & Power)
5.7dB Preamplifier
31.6dB Power Amplifier
Harmonic Distortion <0.005% 1kHz - 8 Ohms
Signal to Noise Ratio 100dBa (ref 470mV)
Power Source 100V – 120V 50Hz / 60Hz
220V – 240V 50Hz / 60Hz
Power Consumption StandBy <25W, Full Power 2-CH 8Ohms< 330 W, 4Ohms<550W
Dimension 432 x 380 x 90 (W x D x H) mm
432 x 380 x 102 (including feet)
Weight 14 Kg

Power Amplifier Specs:

Inputs     Straight RCA(L&R)
Trimmed RCA(L&R)
Input Impedance     23 kΩ
Input Sensitivity (115W)     900mV
Outputs Speaker     L & R (x1)
Output Power     >125 Watts, into 8Ω
both channels driven
>200 Watts, into 4Ω
both channels driven
Power Supply     500VA Ultra Low Noise Toroidal Transformer
Damping Factor     >110 (8Ω
Frequency response     (-3dB), <3Hz – >100kHz
Straight or trimmed input
Gain     31.6 dB Straight or untrimmed
-50 dB (Full Mute) Fully trimmed
Harmonic Distortion     <0.003% 1kHz - 8Ω
Signal to Noise Ratio     100dBa (ref. 900mV)
Power Source     100V – 120V 50Hz / 60Hz
220V – 240V 50Hz / 60Hz
Power Consumption     Warm Up Mode <25W, Full Power <800W
Dimension     432 x 380 x 90 (W x D x H) mm
432 x 380 x 105 (including feet)
Weight     14 Kg


Providing your item is in stock, the order is usually dispatched within 24 hours. Please remember that postage and packing is completely free for orders over £50*. Out of stock items will be dispatched as soon as they become available, out of stock items can take between 4 to 21 days for dispatch.

Deliveries usually take 1-3 working days. The majority of orders are sent via our couriers'; Interlink Express on a next-day-delivery service. Smaller, low value or light-weight items are normally posted using Royal Mail Recorded or Royal Mail Special Delivery.

Once your product has been dispatched, you will be notified via email and sent a unique consignment number, you can use this number at to check the status of your delivery. If you have provided a mobile telephone number, Interlink's Predict service will notify you by text (and email) of a one-hour delivery window. If the window they suggest is inconvenient, you can change the date of delivery to a later one via text or email.

*We ship free of charge to mainland UK addresses, excluding the Scottish Highlands or 'Out-Of-Reach' Scottish locations. Please consult the post-codes below to see if your location falls within this category. If you are still unsure, please contact us on 01432 354921. We also ship to Northern Ireland, Channel Islands, Scilly Isles, Scottish Isles and Scottish Highlands, however delivery to these locations will incur a charge and can only be sent via a 2-day service.

Shipping CostsMainland UK (Next-Day)Offshore/Out-of-reach (2-day)Northern Ireland, Channel Islands, Isle of Man, Scottish Islands, Scilly IslandsRepublic of Ireland (2-day)
Under £50 Orders £7.50 £12.50 £15.00
Over £50 Orders FREE £19.99 £29.99
Surcharge Orders £50.00 £69.99 £79.99
Saturday Delivery £12.99 N/A N/A
Sunday Delivery £12.99 N/A N/A
Saturday by 12 Delivery £35 N/A N/A


Post codes exempt from the free delivery service include:

Scottish Highlands Post Codes: AB30-38, AB41-42, AB44-56, FK17-99, G83, IV1-28, IV30-39, IV52-54, IV63, KW1-14, PA21-33, PA34-40, PH15-26, PH31-41, PH49-50
Islands Post Codes: HS1-9, IV40-51, IV55-56, KA27-28, KW15-17, PA20, PA41-49, PA60-78, PH42-44, ZE1-3
Northern Ireland: All BT postcodes
Channel Islands Post Codes: JE, GY
Scilly Isles Post Codes: TR21, TR22, TR23, TR24, TR25

Press & Awards