We use cookies to make your experience better. We would like to set cookies on your browser. Learn more.
Vertere Sabre High-End Moving Magnet Cartridge
Free UK Delivery
Key Features
- Aluminium alloybody CNC precision machined from solid
- The body is mass-tuned to the generator for optimum support and control of unwanted mechanical vibrations
- Sabre utilises an Alnico magnet with its suspension individually positioned and aligned for maximum musical performance
- The generator is uniquely fixed to the body via four ‘spike’ screws precisely positioned and torqued for maximum rigidity and performance
- No adhesives used in mounting the generator to the cartridge body 1
- The Micro-Elliptical diamond stylus tip is bonded to an aluminium tube cantilever designed for maximum tracking ability without compromising high-frequency response or increased surface noise
- Threaded body to accept the supplied stainless steel thumbscrews for correct coupling of the cartridge body to the tonearm headshell
- Three specifically designed contact areas machined into the top of the body that provide the exact mechanical coupling required
- Alignment ridge on the front top that assists mounting Sabre to any Vertere tonearm
- Bonded through diamond assembly maximises alignment and rigidity
- Wideband frequency response of below 15Hz to above 25kHz
- Output of 4.0mV will provide a lifelike dynamic range with depth and precision
Vertere Sabre High-End Moving Magnet Cartridge
Sabre’s body is precision machined from solid Aluminium alloy with its final mass perfectly tuned to the generator for ideal support and control of unwanted mechanical vibrations. In turn, the generator is uniquely fixed to the body via four ‘spike’ screws that are precisely positioned and torqued for maximum rigidity and performance.
Cartridge mounting is via two machined threaded fixing holes. Also supplied with the cartridge are two Vertere stainless steel thumb screws designed to ensure correct coupling of the cartridge body to the tonearm head-shell. Each Sabre‘s cantilever/suspension is individually positioned and aligned at Vertere to ensure maximum musical performance.
The Elliptical diamond stylus tip is rigidly fixed and bonded to an aluminium tube cantilever designed for maximum tracking ability without compromising on high-frequency response or low surface noise. Sabre has an extended response of below 15Hz to over 25kHz which when coupled with its low mass moving magnet and output of 4.0mV creates a lifelike dynamic range and scale with incredible detail, low frequency ‘punch’, depth and precision.
Who are Vertere Acoustics?
Vertere Acoustics’ ideology is simple and couldn’t be more true. It’s that any Hifi System is only as good as its weakest link. Everything, including the cables, tonearm and every part of their equipment, must be balanced and engineered with care, attention and passion, to get the absolute best from your favourite album.
Vertere engineers all of their products from the ground up, starting at the fundamentals of cutting and producing a record to get as close to the original recording as possible.
That may sound like a simple less is more philosophy, but we prefer to look at it this way: the best audio equipment shouldn’t add anything to the original recording. Rather it should affect it as little as possible; bringing the listener ever closer to what the artist, producer and mastering engineer wanted you to hear.
Vertere Acoustics was founded by Touraj Moghaddam, designer of Roksan’s ever-popular & infamous Xerxes turntable. Over the last decade, Touraj has been refining his designs to produce some of the world's finest turntables, with a frightening amount of time, effort and attention to detail put into each and every one.
Frequency Response | 15 Hz -25 kHz |
Channel Separation | Minimum 22 dB |
Output Level | 4.0mV (1kHz, 5cm/sec.) |
Recommended Phono Input load |
47 kΩ / 100 pF – 220 pF |
Recommended Tracking Weight | 2.0 g (1.9 g - 2.1 g) |
Frequency response | 15 Hz -25 kHz |
Channel separation | Minimum 22 dB |
Cantilever | Aluminium Alloy Tube |
Stylus | Elliptical Diamond 7.5 x 15.5 μm |
Mounting | Special Tri-Point contact with M2.5 Threaded Fixing Holes |
Generator Fixing | Special Quad-Point Contact with M2.5 Stainless ‘Spike’ Screws |
Dynamic Compliance | 10 x 10-⁶ cm/dyne |
Coil Resistance | 1 kΩ (per Channel) |
Recommended Load Capacitance | 100 – 200pF |
Weight | 10.3 g |
Dimensions | 17.3 (H) x 17.0 (W) x 28.2 (L) mm |
UK Delivery
Providing your item is in stock, the order is usually dispatched within 24 hours. Postage and packing is completely free for orders over £99*. Out of stock items will be dispatched as soon as they become available, which can take between 4 to 21 days
UK Delivery orders are sent via our couriers' DPD Local on a next-day-delivery service and usually take between 1 and 3 days.
Local Delivery
Certain manufacturers disallow mail order for their products, however a local delivery may be possible.
We offer a local delivery service for a large number of our products. After your order has been placed, a member of the Hifi Gear team will contact you to arrange a convenient date and time for your local, personal delivery.
Click & Collect
We offer a free ‘Click & Collect’ service on all items. As soon as your order has been completed and is ready for collection a member of our team will be in contact with you. Orders can be collected from our store at 11 King Street, Hereford, HR4 9BW.
Please use this link to find more detailed delivery information or contact us for more details
-
Vertere Mystic Moving Coil Cartridge£2,450.00
-
Vertere Acoustics DG-1 Dynamic Groove Turntable - Ex DisplaySpecial Price £2,295.00 Regular Price £2,949.00