Select Store

Dynavector DV XX2 MKII MC Cartridge

Free UK Delivery

In Stock
 
£1,295.00
Payments

Dynavector DV XX2 MKII MC Cartridge

The Dynavector DV XX-2 MKII has the capabilities of delivering deep and meaningful bass in conjunction with treble that is precise and clear, without sounding in anyway ‘harsh’ when compared with rival counterpart moving coil designs of a similar price bracket. This is all delivered from 25 year’s worth of cartridge design from a brand that is dedicated to vinyl, and not to just making any ‘run of the mill’ moving coil cartridge.

Using a flux damper that features the Alnico-5 magnet and similar design construction to the highly praised Te Kaitora Rua, the overall magnetic resistance is lower. On top of this, a more stable output voltage is transmitted from the DV XX-2 MKII because it has a lower resistance than rare earth and ferrite alternatives.

A solid boron cantilever of 6mms features a Pathfinder Line contact stylus, whilst Pure Copper Ohno Continuous Casting Process (PCOCC) copper wire is used exclusively for the coil. With an output of 0.29mV, higher than the XX-2 MKI, and with 6 ohms impedance, the XX-2 MKII is suited to most moving coil phono stages. The body is machined from the hardest aluminium available: 7075. Only weighing 8.9 grams, it is suited to a variety of tonearms.

Who is Dynavector?

Dynavector is an established manufacturer of quality moving coil cartridges, designed and engineered to offer a superlative sonic performance while retaining the most accessible price possible at each section of the market. Founded in 1975, Dynavector has achieved their superior status over decades of technological refinement and true quality craftsmanship.

Type  Low output moving coil cartridge with Alnico magnet and Flux damper 
 Output Voltage 0.28mV (at 1KHz, 5cm/sec.) 
Channel Separation  30 dB (at 1KHz) 
Channel Balance  1.0 dB (at 1KHz) 
 Frequency Response 20 - 20,000Hz (± 1dB) 
 Compliance 10 x 10-6 cm/dyn 
 Tracking Force 1.8 - 2.2 grams 
Impedance  R=6 ohms 
Recommended load
resistance
 
 > 30 ohms 
 Cantilever  6mm length 0.3 mm dia. solid boron 
 Stylus PF Line contact shape, stylus radius: 7 x 30 micron 
Weight 8.9 grams

Providing your item is in stock, the order is usually dispatched within 24 hours. Postage and packing is completely free for orders over £100*. Out of stock items will be dispatched as soon as they become available, out of stock items can take between 4 to 21 days for dispatch.

          

Orders are sent via our couriers' DPD on a next-day-delivery service and usually, take between 1 and 3 days. 

          

Please use this link to find more detailed delivery information.

       

*We ship free of charge to mainland UK addresses, excluding the Scottish Highlands or 'Out-Of-Reach' Scottish locations. Please consult the post-codes below to see if your location falls within this category. If you are still unsure, please contact us on 01432 354921. We also ship to Northern Ireland, Channel Islands, Scilly Isles, Scottish Isles and Scottish Highlands, however, delivery to these locations will incur a charge and can only be sent via a 2-day service.