Select Store

Dynavector DRT XV-1t MC Cartridge

Free UK Delivery

In Stock

Dynavector DRT XV-1t MC Cartridge

Even in a world of digital formats that provide convenience and can provide accurate reproduction (depending on bit stream and compression qualities), the vinyl record is still on top in terms of sound qualities – by miles!

To make a point that vinyl will always be here to stay, Dynavector has poured years’ worth of technology into producing the DRT XV1-t. to allow people to experience their treasured vinyl record collection with the best performance that is possible. Dynavector’s commitment to this format is never failing: build, sound and endurance have been three things that they have effortlessly contributed to all of their products. However, the DRT XV1-t is what really sets Dynavector apart from its competitive counterpart manufacturers.
Features the revolutionary shaped high-purity iron armature that is wound with extremely fine wire in conjunction with multiple Alnico column magnets which are supported by carbonised bamboo, coated in an enduring lacquer from Japan known as Urushi.

Although these materials are rare and exotic to get hold of, it is certainly something that stands out from the crowd. As with any product, the proof is all in the listening.

Who is Dynavector?

Dynavector is an established manufacturer of quality moving coil cartridges, designed and engineered to offer a superlative sonic performance while retaining the most accessible price possible at each section of the market. Founded in 1975, Dynavector has achieved their superior status over decades of technological refinement and true quality craftsmanship.


Type  Low output moving coil cartridge with
multi Alnico magnets and the Flux damper 
 Output Voltage 0.35mV (at 1KHz, 5cm/sec.) 
 Channel Separation 30 dB (at 1KHz) 
 Channel balance  1.0 dB (at 1KHz) 
 Frequency response 20 - 20,000Hz (± 1dB) 
 Compliance 10 x 10-6 cm/dyn 
 Tracking force 1.8 - 2.2 grams 
 Impedance R=24 ohms 
 Recommended load
> 75 ohms 
 Cantilever  6mm length 0.3 mm dia.
solid boron with a special armaturer 
 Stylus tip PF Line contact shape,
stylus radius: 7 x 30 micron 
Weight 12.0 grams

Providing your item is in stock, the order is usually dispatched within 24 hours. Postage and packing is completely free for orders over £100*. Out of stock items will be dispatched as soon as they become available, out of stock items can take between 4 to 21 days for dispatch.


Orders are sent via our couriers' DPD on a next-day-delivery service and usually, take between 1 and 3 days. 


Please use this link to find more detailed delivery information.


*We ship free of charge to mainland UK addresses, excluding the Scottish Highlands or 'Out-Of-Reach' Scottish locations. Please consult the post-codes below to see if your location falls within this category. If you are still unsure, please contact us on 01432 354921. We also ship to Northern Ireland, Channel Islands, Scilly Isles, Scottish Isles and Scottish Highlands, however, delivery to these locations will incur a charge and can only be sent via a 2-day service.